论文/Influence of wall thickness on the stability of the resistive wall mode in tokamak plasmas提交纠错

Influence of wall thickness on the stability of the resistive wall mode in tokamak plasmas

文献资料

作者:
  • Richard Fitzpatrick
署名说明:
暂无资料
期刊/出版物:
Physics of Plasmas
DOI:
10.1063/1.4773907
语言:
英语
文献类型:
article
作者署名机构:
  • 作者
    Richard Fitzpatrick
    affiliation
    Department of Physics, Institute for Fusion Studies, University of Texas at Austin, Austin, Texas 78712, USA
    对应版本
    2013 出版版
通讯作者:
  • 作者
    Richard Fitzpatrick
    affiliation
    University of Texas at Austin
    对应版本
    2013 出版版
    basis
    OpenAlex is_corresponding=true;原文未标记
发表日期:
online
2013-01-07
print
2013-01-01
print_date_source
Crossref published-print
年份
2013
卷号:
20
期号:
1
页码或文章编号:
article_number
012504
page_range
012504-1–012504-5
page_count
5
arXiv 标识:
暂无资料

研究内容与方法

关键词:
  • resistive wall mode
  • tokamak
  • finite wall thickness
  • plasma rotation
  • neoclassical parallel ion viscosity
研究领域:
  • 等离子体物理
  • 磁约束聚变
  • 磁流体力学稳定性
  • 电阻壁模
研究问题:
有限壁厚如何改变托卡马克电阻壁模的稳定性边界,以及适度环向旋转将等离子体稳定至理想导电壁极限的能力?
实验装置:
  • 名称
    DIII-D
    relationship
    理论模型参数参照
    说明
    计算采用典型 DIII-D 等离子体 m=3、n=1 电阻壁模参数,并拟合其壁响应;本文不报告新实验。
  • 名称
    ITER
    relationship
    研究动机与应用讨论
    说明
    作为下一代厚壁装置示例,未进行 ITER 专属计算。
使用软件:
  • 名称
    Valen
    relationship
    壁参数标定所用数据来源软件
    说明
    以 Valen 对无耗散等离子体的 RWM 增长率与 Boozer 稳定参数的计算数据拟合 DIII-D 壁参数。原文未给版本,也未命名本文色散关系求解器。
使用数据:
  • 名称
    Valen 计算的 DIII-D 壁响应数据
    relationship
    参数拟合输入
    说明
    无耗散等离子体 RWM 增长率随 Boozer 稳定参数变化的数据,用于拟合壁参数;无公开数据文件链接。
  • 名称
    DIII-D 典型等离子体及边缘参数
    relationship
    模型参数输入
    说明
    原文 III.A 引用文献23、24提供参数,不是本文新采集实验数据。

出版与资源

收稿日期:
2012-10-24
接收日期:
2012-12-14
出版机构:
American Institute of Physics
获取方式:
status
closed
source
OpenAlex
snapshot_collected_at
2026-10-12 02:33:31
limitation
登记快照状态;2026-11-06出版商页返回403,未实时确认访问政策。
使用许可:
copyright_holder
American Institute of Physics
年份
2013
statement
Redistribution subject to AIP license or copyright
open_license
原件未列明开放许可证
出版页面:
https://pubs.aip.org/pop/article/20/1/012504/1016496/Influence-of-wall-thickness-on-the-stability-of
配套代码:
暂无资料
配套数据:
暂无资料
补充材料:
暂无资料
资助信息:
  • funder
    U.S. Department of Energy
    award_number
    DE-FG02-04ER-54742
    support_type
    Contract
更正与撤稿信息:
暂无资料

关联研究与影响

相关论文:
  • DOI
    10.1063/1.2245542
    relationship
    引用/模型前期工作
    citation
    R. Fitzpatrick and J. Bialek, Phys. Plasmas 13, 072512 (2006)
    关联原因
    原文文献17,所用圆柱等离子体模型前期工作
  • DOI
    10.1063/1.2446041
    relationship
    引用/模型与参数前期工作
    citation
    R. Fitzpatrick, Phys. Plasmas 14, 022505 (2007)
    关联原因
    原文文献18,模型及DIII-D壁参数
  • DOI
    10.1063/1.1362532
    relationship
    引用/软件方法
    citation
    J. Bialek et al., Phys. Plasmas 8, 2170 (2001)
    关联原因
    原文文献25,Valen
  • DOI
    10.1063/1.4729335
    relationship
    引用/壁厚研究
    citation
    V. D. Pustovitov, Phys. Plasmas 19, 062503 (2012)
    关联原因
    原文文献15,已有非薄壁研究
相关著作:
暂无资料
历史引用资料(口径待核):
count
5
source
Crossref
metric
is-referenced-by-count
获取日期
2026-11-06
record_indexed_at
2025-07-30T10:59:41Z
引用统计来源:
平台
Crossref
metric
is-referenced-by-count
引用统计日期:
获取日期
2026-11-06
record_indexed_at
2025-07-30T10:59:41Z
说明
访问日非数据库保证的计数截至日;记录更新时间单独保留。

基本资料

审稿意见:
暂无资料
外部用户评论:
暂无资料
论文版本:
  • version_type
    version of record
    publication_date
    2013-01-07
    DOI
    10.1063/1.4773907
    journal
    Physics of Plasmas
    volume
    20
    issue
    1
    article_number
    012504
    说明
    已核实正式出版版;未确认预印本或修订版。
译文:
暂无资料

程序计算

库内被引次数:
首批录入完成后计算
是否库内高被引:
尚未计算
质量分数:
暂无资料
完备性评分:
暂无资料
可信度评分:
暂无资料
聚变相关度评分:
暂无资料

原文摘要

The influence of finite wall thickness on the stability of the resistive wall mode (RWM) in a tokamak is determined using a simple cylindrical plasma model in which the dissipation required to stabilize the mode is provided by neoclassical parallel ion viscosity. For present-day tokamaks, which possess relatively thin walls, finite wall thickness effects are found to have relatively little influence on the RWM stability boundaries, which are almost the same as those calculated in the thin-wall limit. On the other hand, for next-step devices, which are likely to possess much thicker walls than present-day tokamaks, finite wall thickness effects are found to significantly impede the ability of plasma rotation to stabilize the RWM all the way to the perfect-wall stability limit.

原始程序说明(PROGRAM SUMMARY)

暂无资料

研究背景

站内整理(2013出版版):先进托卡马克需要依靠近贴导电壁提高外部扭曲模的β极限,而电阻壁模稳定是实现这一收益的前提。适度环向旋转可通过惯性与耗散的共同作用稳定RWM。此前理论多采用电磁薄壁近似;下一代装置可能因工程需要使用厚壁,已有厚壁研究主要讨论增长率,因此仍需研究厚度对稳定边界的影响。

研究目标

站内整理(2013出版版):利用含新经典平行离子黏性的圆柱等离子体模型,直接确定有限壁厚对RWM稳定边界的影响,判断厚壁促进或阻碍环向旋转稳定RWM的条件,以及对有效β极限的意义。

方法与实验设计

站内整理(2013出版版):采用大纵横比、低β、圆截面托卡马克圆柱模型,以新经典平行离子黏性提供耗散,忽略极向旋转并取均匀环向角速度。由等离子体本征模方程积分获得复响应参数;分别求解真空区与有限厚导电壁内的磁通扰动,在壁内外边界匹配得到含修正贝塞尔函数的RWM色散关系,并给出薄壁及厚壁极限。计算采用典型DIII-D的m=3、n=1模参数,壁响应参数以Valen数据拟合。通过调整中心安全因子与环向角速度,使色散关系增长率为纯虚数,追踪临界稳定边界;改变相对壁厚时保持总电阻相同。

主要结果

站内整理(2013出版版):在图1所用DIII-D参数及薄壁极限下,临界环向旋转速度约为Alfvén速度的0.6%,稳定范围几乎达到理想导电壁极限。实际DIII-D有限壁厚对稳定边界影响很小。对总电阻相同的更厚壁,接近无壁极限时所需临界旋转降低,接近理想壁极限时则增大,因而妨碍旋转稳定延伸至理想壁极限。降低边缘安全因子会提高所需旋转,并增强中等旋转时的惯性失稳;厚壁几乎消除该中等旋转惯性失稳。以上为模型数值结果,不是新实验实测。

讨论与科学意义

站内整理(2013出版版):薄壁近似对DIII-D一类当代薄壁装置的稳定边界计算足够准确,但下一代较厚壁装置可能无法靠同样的旋转稳定机制达到理想壁β极限。作者讨论结论对耗散模型的依赖:新经典模型简单,适合大量色散关系求解,并能给出与常规托卡马克观测大致一致的边界;更复杂的漂移动理学阻尼模型在低纵横比装置中表现成功。两类模型具有类似的三根色散结构,使作者希望结论具有一般性,这仍是论证与展望,未在本文中完成替代模型验证。

局限与后续方向

站内整理(2013出版版):模型限于大纵横比、低β、圆截面近似;忽略极向旋转,假设均匀环向角速度,并用等离子体边缘代表值近似新经典黏性。具体扫描基于DIII-D参数,ITER仅作为厚壁下一代装置示例。作者明确提出结果是否依赖阻尼模型的问题,并比较漂移动理学阻尼模型;结论跨阻尼模型的普适性仍待检验。

数据、代码与可复现性

对应版本
2013 出版版
type
站内整理
available
  • II节给出平衡模型、响应方程、壁内外匹配及色散关系(式1–28)
  • III.A列出DIII-D等离子体与壁参数及其参考来源
  • 图1–3注明模数、边缘安全因子、黏性及壁厚扫描参数
  • III.A说明通过调整中心安全因子和环向角速度寻找纯虚增长率边界
limitations
  • 正文未给色散关系求解器源码、软件版本、求根容差或收敛测试
  • 未发现本文配套代码仓库或数值输出数据存档
  • 复现还需实现数值积分与复根边界搜索,本文未实际复算

内容概述

站内整理|依据2013出版版第II–IV节:本文以含新经典平行离子黏性的圆柱模型研究有限壁厚对托卡马克电阻壁模稳定边界的影响。DIII-D的实际壁厚对结果影响很小;在总电阻相同的比较下,更厚的壁降低无壁极限附近的临界旋转,却提高理想壁极限附近的要求,并抑制中等旋转下的惯性失稳。因此厚壁可能限制依靠旋转达到理想壁稳定极限的能力。结论对其他阻尼模型的普适性仍待验证。

原文结论

IV. SUMMARY We have determined the influence of finite wall thick- ness on the stability of the RWM in a tokamak using a previ- ously published 16–18 cylindrical plasma model in which the dissipation required to stabilize the mode is provided by neo- classical parallel ion viscosity. We find that for present-day tokamaks, such as DIII-D, which possess relatively thin walls, finite wall thickness effects have relatively little influ- ence on the RWM stability boundary, which is almost the same as that calculated in the thin-wall limit. We also find that for next-step devices, such as ITER, which are likely to possess much thicker walls than present-day tokamaks, finite wall thickness effects can significantly impede the ability of plasma rotation to stabilize the RWM all the way to the perfect-wall stability boundary. Finally, we find that thick walls decrease the critical plasma rotation needed to stabilize the RWM close to the no-wall stability boundary, and also suppress any inertial destabilization of the mode at interme- diate rotation levels. One obvious question is the extent to which the conclu- sions of this paper are dependent on the damping model. The neoclassical model used in this paper was selected because it is extremely simple (which is an important consideration, since the stability diagrams shown in the figures required hundreds of solutions of the RWM dispersion relation), and yet leads to RWM stability boundaries that are broadly con- sistent with those observed in conventional tokamaks such as DIII-D and HBT-EP. 17 In recent years, various researchers have developed a drift-kinetic damping model for the RWM. 27–29 This model, which is significantly more compli- cated than the neoclassical model, has been highly successful at explaining the RWM stability boundaries observed in low aspect-ratio tokamaks such as NSTX. 30 It is interesting to note that the drift-kinetic damping model leads to a cubic dispersion relation (with two roots rotating with the plasma, one leading and one lagging, and one slowly rotating root that can be identified as the RWM), 31,32 in accordance with results obtained using simple damping models 22 (including the model adopted in this paper—we have simply not talked about the rotating roots, because they are always stable). This encourages us to hope that the conclusions of this paper are generic, and are not specific to the adopted damping model.

评论 (0)