Magnetic Control of Tokamak Plasmas

- 作者:
- Marco Ariola
- Alfredo Pironti
- 译者:
- 暂无资料
- 出版社:
- Springer International Publishing
- 出品方:
- 暂无资料
- 出版日期:
- 时间
- 2016-03-02
- precision
- day
- format
- hardcover
- edition
- 2
- isbn
- 978-3-319-29888-7
- ISBN:
- 978-3-319-29888-7
- 3319298887
- 页数:
- XV, 203
- 装帧:
- 精装
- 定价:
- EUR 129.99
- 丛书:
- Advances in Industrial Control
内容简介
- 核心观点:
- 在保留主要物理现象与便于控制器设计之间选择合适模型并进行降阶。
- 为耦合的多变量系统设计鲁棒控制,同时考虑执行器电压、电流与功率约束。
- 根据不同时间尺度处理垂直位置控制与整体形状、电流控制。
- 研究问题:
- 如何利用足够简洁但保持主要物理特征的模型设计托卡马克磁控制器?
- 如何在强耦合、高阶模型与执行器约束下实现位置、形状和电流的稳定鲁棒控制?
- 主要人物:
- 暂无资料
- 涉及地点:
- Cadarache, France
- Napoli, Italy
- 涉及事件:
- 2015年巴黎气候协定:丛书前言用于说明低碳能源研究背景
- 相关术语:
- tokamak
- plasma
- magnetic control
- vertical stabilization
- resistive wall modes
- isoflux
- MIMO
- 争议与批评:
- 暂无资料
- 简介与摘录译文:
- type
- 出版社简介首句译文
- source_language
- en
- target_language
- zh-CN
- edition
- 第2版(2016)
- original_text
- This book is a complete treatment of work done to resolve the problems of position-, current-, and shape-control of plasma in tokamak-type (toroidal) devices being studied as a potential means of commercial energy production by nuclear fusion.
- translated_text
- 本书全面介绍为解决托卡马克型(环形)装置中等离子体的位置、电流和形状控制问题所开展的工作;这些装置正被研究用作通过核聚变实现商业能源生产的潜在途径。
- source_locator
- 出版社简介(meta description及About this book)首句
- translation_method
- AI翻译,经本次逐句核对,非作者或出版社官方译文
- 原始简介/摘要:
- This book is a complete treatment of work done to resolve the problems of position-, current-, and shape-control of plasma in tokamak-type (toroidal) devices being studied as a potential means of commercial energy production by nuclear fusion. Modelling and control are both detailed, allowing non-expert readers to understand the control problem. Starting from the magneto-hydro-dynamic equations, all the steps needed for the derivation of plasma state-space models are enumerated with frequent recall of the basic concepts of electromagnetics. The control problem is then described, beginning with the control of current and position—vertical and radial—control and progressing to the more challenging shape control. The solutions proposed vary from simple PIDs to more sophisticated MIMO controllers. The second edition of Magnetic Control of Tokamak Plasmas contains numerous updates and a substantial amount of completely new material covering areas such as: • modelling and control of resistive wall modes—the most important non-axisimmetric mode; • the isoflux approach for shape control; • a general approach for the control of limiter plasmas; • the use of inner vessel coils for vertical stabilization; and • significantly enhanced treatment of plasma-shape control at JET, including experimental results and introducing a method implemented for operation in the presence of current saturations. Whenever possible, coverage of the various topics is rounded out with experimental results obtained on currently existing tokamaks. The book also includes a presentation of the typical actuators and sensors used for control purposes in tokamaks. Some mathematical details are given in the appendices for the interested reader. The ideas formulated in this monograph will be of great practical help to control engineers, academic researchers and graduate students working directly with problems related to the control of nuclear fusion. They will also stimulate control researchers interested more generally in the advanced applications of the discipline. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
创作者与相关人物
- 作者简介:
- Marco Ariola was born in Naples, Italy, in 1971. He received the Laurea degree in electronic engineering and the Research Doctorate degree in electronic engineering and computer science from the University of Naples Federico II, Naples, Italy, in 1995 and 2000, respectively. From 1996 to 2005 he was with the Department of Computer and Systems Engineering of the University of Naples Federico II. Currently, he is a full Professor of Automatic Control at the University of Naples Parthenope in the Engineering Department. From September 1998 to February 1999, he was a Visiting Scholar with the Department of Electrical & Computer Engineering of University of New Mexico, Albuquerque, NM, USA. His research interests include statistical control, robust control, control of nuclear fusion devices, control of aerospace systems. He has published more than 150 journal papers, conference papers, articles in books and encyclopedias. He is co-author of the books “Magnetic Control of Tokamak Plasmas” and “Finite-Time Stability and Control” published by Springer in 2008 and 2013. He is a senior member of the IEEE. Professor Alfredo Pironti received the Laurea degree cum Laude in Electronic Engineering, and the PhD in Electronic and Computing Engineering from the University of Naples Federico II in 1991 and 1995, respectively. Since 1991 he works at the University of Naples Federico II, where he currently is a Full Professor of System and Control Theory in the Department of Electrical and Information Technology Engineering. He has spent several periods as visiting researcher at the Max Planck Institute for Plasma Physics in Garching (Germany), the Center for Control Engineering and Computation (University of California at Santa Barbara), the ITER Joint Work Site of Naka (Japan), and the EFDA-JET site of Culham (UK). His research interests include application of feedback control to nuclear fusion problems, robust control of uncertain systems, and differential games theory. In 2005 Alfredo Pironti has been guest editor for the IEEE Control Systems Magazine journal, where he has contributed to two special issues focused on the control of plasmas in tokamak machines. In 2008 he has co-authored the book "Magnetic Control of Tokamak Plasmas" published by Springer. He contributes to the IEEE CSS Technical Committee on Power Generation, co-chairing the thrust on Nuclear Energy Generation. He is author of more than 200 papers published on international journals, books, and conference proceedings.
- 作者:
- Marco Ariola
- Alfredo Pironti
- 编者/主编:
- 暂无资料
- 译者:
- 暂无资料
- 插画师:
- 暂无资料
- 摄影师:
- 暂无资料
- 序言作者:
- Marco Ariola
- Alfredo Pironti
- 后记作者:
- 暂无资料
- 校注者:
- 暂无资料
- 机构作者:
- 暂无资料
- 责任编辑:
- 暂无资料
- 研究者与评论者:
- 名称
- Giuseppe Ambrosino
- 角色
- 引导作者进入自动控制及托卡马克控制研究,提供持续建议。
- 名称
- Raffaele Albanese
- 角色
- 开发书中多数控制器设计所依托的模型与工具的合作者。
- 名称
- Gianmaria De Tommasi
- 角色
- 开发相关模型与工具的合作者。
- 名称
- Massimiliano Mattei
- 角色
- 开发相关模型与工具的合作者。
- 名称
- Fabio Villone
- 角色
- 开发相关模型与工具的合作者。
目录
- 章节目录:
- edition
- 2
- chapters
- number
- 1
- 标题
- Introduction
- pages
- 1-20
- part
- 暂无资料
- number
- 2
- 标题
- Plasma Modelling for Magnetic Control
- pages
- 23-41
- part
- Plasma Modelling
- number
- 3
- 标题
- The Plasma Boundary and Its Identification
- pages
- 43-62
- part
- Plasma Modelling
- number
- 4
- 标题
- Modelling of the Resistive Wall Modes
- pages
- 63-73
- part
- Plasma Modelling
- number
- 5
- 标题
- Plasma Magnetic Control Problem
- pages
- 77-90
- part
- Plasma Control
- number
- 6
- 标题
- Plasma Position and Current Control at FTU
- pages
- 91-99
- part
- Plasma Control
- number
- 7
- 标题
- Plasma Vertical Stabilization
- pages
- 101-115
- part
- Plasma Control
- number
- 8
- 标题
- Plasma Shape Control for ITER
- pages
- 117-127
- part
- Plasma Control
- number
- 9
- 标题
- Plasma Shape Control at TCV
- pages
- 129-141
- part
- Plasma Control
- number
- 10
- 标题
- Plasma Shape Control at JET
- pages
- 143-167
- part
- Plasma Control
- number
- 11
- 标题
- Control of the Resistive Wall Modes for the ITER Tokamak
- pages
- 169-180
- part
- Plasma Control
- front_matter
- i-xv
- part_title_pages
- Plasma Modelling
- 21
- Plasma Control
- 75
- back_matter
- 181-203
- original_text
- Table of contents (11 chapters) Front Matter Pages i-xv Download chapter PDF Introduction Marco Ariola, Alfredo Pironti Pages 1-20 Plasma Modelling Front Matter Pages 21-21 Download chapter PDF Plasma Modelling for Magnetic Control Marco Ariola, Alfredo Pironti Pages 23-41 The Plasma Boundary and Its Identification Marco Ariola, Alfredo Pironti Pages 43-62 Modelling of the Resistive Wall Modes Marco Ariola, Alfredo Pironti Pages 63-73 Plasma Control Front Matter Pages 75-75 Download chapter PDF Plasma Magnetic Control Problem Marco Ariola, Alfredo Pironti Pages 77-90 Plasma Position and Current Control at FTU Marco Ariola, Alfredo Pironti Pages 91-99 Plasma Vertical Stabilization Marco Ariola, Alfredo Pironti Pages 101-115 Plasma Shape Control for ITER Marco Ariola, Alfredo Pironti Pages 117-127 Plasma Shape Control at TCV Marco Ariola, Alfredo Pironti Pages 129-141 Plasma Shape Control at JET Marco Ariola, Alfredo Pironti Pages 143-167 Control of the Resistive Wall Modes for the ITER Tokamak Marco Ariola, Alfredo Pironti Pages 169-180 Back Matter Pages 181-203 Download chapter PDF
原文摘录
- 摘录与页码:
- 原文
- The book is divided into two parts: Plasma Modelling and Plasma Control.
- page
- x
- section
- Preface
- 序言:
- Preface This book offers a thorough coverage of the magnetic control of a plasma in a tokamak. A plasma is a gas in which an important fraction of the particles is ionized, so that the electrons and ions are separately free; tokamaks are devices constructed in the shape of a torus (or doughnut), in which the plasma is confined by means of magneticfields. Tokamaks have been proved to be the most promising approach to obtaining energy production from nuclear fusion. For nuclear fusion to happen in a plasma, it is necessary to heat the plasma to a sufficiently high temperature of around 100 million degrees centigrade: this motivates the need for devices in which the plasma is restricted to afinite spatial region without any physical boundary. In a tokamak the confinement is obtained through balancing the expansion pressure in the plasma with the forces exerted by a magneticfield produced by currentsflowing in a number of circuits surrounding the plasma. The equilibrium between these forces is such that the plasma assumes the geometrical form of a ring inside the vacuum chamber of the tokamak. The importance of tokamaks for the future of nuclear fusion is demonstrated by the fact that a new experimental facility, called ITER, is being built in Cadarache (France) as a joint effort by most of the industrialized countries in the world. ITER is expected to open the way to the commercial exploitation of nuclear fusion. The successive step DEMO, which will be a power plant demonstrator, is already in the design phase, and should be in operation around 2050. The magnetic control system is a feedback system, sometimes divided into separate sub-systems, which has the aim of guaranteeing that the plasma equilibrium inside the tokamak is maintained with a prescribed position and shape of the plasma ring. The design of this control system is the main topic of this book. Historically, thefirst problem that was faced was the vertical stabilization of the plasma. Indeed, physical studies demonstrated that the efficiency of the confinement configuration was improved if the plasma exhibited a vertically elongated shape. Unfortunately, with this elongated configuration the equilibrium turned out to be unstable. This problem was tackled using a simple SISO (single-input – single-output) loop, typically with a PID (proportional-integral-derivative) controller whose gains were experimentally tuned. Following this, simple stabilization of the plasma was no longer enough for the experimental activities, and the problem of controlling the overall shape of the plasma gained more and more importance. As a matter of fact, at present, for most tokamak devices there are programmes aimed at improving the performance of the magnetic control systems. This improvement is being achieved with a substantial paradigm shift, from an empirical design approach to a more formal, model-based design approach. Models deriving from a description of the interaction between the plasma and the circuits are described in terms of a set of nonlinear partial differential equations. The main modelling problem is then that of introducing physical simplifying assumptions and of using approximate numerical methods to obtain a model detailed enough to catch the principal phenomena, but simple enough to make it useful for controller design. Even after these simplifying assumptions, controller design remains a nontrivial problem, mainly for the following reasons: • the models are typically of high order (more than 100 state variables); • the model is multi-input – multi-output with a strong coupling between the channels; • the controller should exhibit stability and performance robustness; indeed it is usually designed on the basis of a nominal plasma equilibrium configuration, but it is expected to perform well during an entire phase of a discharge when some plasma parameters change; • the control variables are subject to physical limits due to the actuator constraints: voltage, current and power limits should therefore be taken into account in the design phase. Along with the presentation of various controller schemes, both for plasma vertical stabilization, and for plasma shape, the book gives insight into the basic principles of nuclear fusion and tokamak operation, and a detailed derivation of the linearized model used for the design. In some cases, the controllers described have been implemented on existing tokamaks, and are now in operation. Some of these control schemes can be proposed for use with the experimental tokamak ITER. The book is divided into two parts: Plasma Modelling and Plasma Control. Then it is organized into 11 chapters plus three appendices. 1. Introduction . This chapter gives some basic notions about nuclear fusion and plasmas. Then a description of tokamaks and of the main magnetic control problems is given. 2. Plasma Modelling for Magnetic Control . In this chapter a description of the plasma model used for the controller design is given. The main simplifying assumptions are illustrated and the steps to derive the model are discussed. 3. The Plasma Boundary and its Identification . In this chapter the most common magnetic sensors used in magnetic control are described. Then the plasma shape identification problem is discussed and an algorithm commonly used to solve this problem is presented. An overview of the mathematical tools used in this chapter can be found in thefirst of the three appendices. 4. Modelling of the Resistive Wall Modes . In this chapter a magnetohydrodynamics linearized model with respect to a plasma equilibrium is derived. This linear model is then used to discuss the stability properties of a plasma equilibrium. Finally, a linear model of the resistive wall modes is introduced. 5. The Plasma Magnetic Control Problem . In this chapter the problem of controlling the plasma current, position and shape is discussed. All aspects are covered: the choice of geometrical variables to control; the formulation of the control problem in terms of desired performance and plant limits; the presentation and comparison of the most commonly used control schemes. 6. Plasma Position and Current Control at FTU . This chapter describes the design of a current and position controller for the FTU/indexFTU tokamak, a tokamak in operation in Italy. This design is presented as afirst example since in this case the problem is made much easier by the fact that the plasma is not vertically unstable. 7. Plasma Vertical Stabilization . This chapter focuses on the most basic control problem in a tokamak: the vertical stabilization problem. It is shown how it is possible to separate this problem from the problem of controlling the overall shape, and two solutions are presented. 8. Plasma Shape Control for ITER . In this chapter the plasma shape control for the ITER tokamak is discussed. A possible solution is presented; this solution exploits the fact that the vertical position control and the plasma current and shape control can be performed on different timescales. 9. Plasma Shape Control at TCV . This chapter presents the design of a high order multivariable compensator for plasma current, position and shape control in TCV, a tokamak in operation in Switzerland. The problem is formulated in the H∞ framework. Experimental results are included. 10. Plasma Shape Control at JET . This chapter describes the design of a new plasma shape controller implemented on the JET tokamak, the world ’ s largest tokamak. From a control point of view, the design is a case of optimal output regulation for a non-right invertible plant, i.e. for a plant with fewer control inputs than controlled outputs. Then a nonlinear current allocator able to manage the current power supplies limits is presented. Some experimental results are included. 11. Control of the Resistive Wall Modes for the ITER tokamak . In this chapter the stabilization of the resistive wall modes for the ITER tokamak is discussed, and a possible solution using the LQG control approach is presented. 12. Appendices . Thefirst appendix covers some mathematical notions that do not typically belong to the background of control engineers. The second appendix briefly discusses the problem of model reduction. Finally, the third appendix is a tutorial which describes the various measurement units used in plasma physics. This work would not have been possible without the help of many people. First of all we have to thank Prof. Giuseppe Ambrosino, who initiated us into automatic control and introduced us to the problem of plasma control in tokamaks. Without his support and most of all his constant advice, we would never have gained the experience and the knowledge that led us to write this monograph. Thanks, Peppe! Most of the controller design presented in this book are based on the models and the tools developed by our colleagues Profs. Raffaele Albanese, Gianmaria De Tommasi, Massimiliano Mattei and Fabio Villone; without their support we would not have been able to design our controllers. Finally we would like to thank Prof. Vincenzo Coccorese, and all the CREATE team: we are really proud to be part of it. Our sincere gratitude goes to all the people working at the sites where we gained our experience on operating tokamaks. In particular: • Dr. Flavio Crisanti of ENEA of Frascati and all the FTU team for the work done at FTU; • Dr. Jonathan Lister of the CRPP of Lausanne and the TCV team for the work done at TCV; • Dr. Filippo Sartori formerly at UKAEA and the JET contributors for the experiments we carried out at JET; • Dr. Alfredo Portone and Dr. Mario Cavinato of Fusion for Energy, with whom we have been collaborating for more than 25 years on ITER magnetic control. Finally, we really have to thank our families and loved ones for their support during this task: very often in recent months we have taken time away from them because of this book. Acknowledgements The work described in Chap. 10 has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014 – 2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. The work described in Chap. 11 has been partially supported by the Italian MIUR under PRIN grant 2010SPS9B3. Napoli Marco Ariola October 2015 Alfredo Pironti
- 后记:
- 暂无资料
出版与版本
- 出版社:
- Springer International Publishing
- 出品方:
- 暂无资料
- 出版地:
- Cham
- 出版日期:
- 时间
- 2016-03-02
- precision
- day
- format
- hardcover
- edition
- 2
- isbn
- 978-3-319-29888-7
- 版次:
- 第2版
- 印次:
- 暂无资料
- 丛书:
- Advances in Industrial Control
- 卷册:
- 暂无资料
- 本版语言:
- en
- 装帧:
- 精装
- 页数:
- XV, 203
- 开本/尺寸:
- 25 cm
- 重量:
- 暂无资料
- 印数:
- 暂无资料
- 其他版本:
- 标题
- Magnetic Control of Tokamak Plasmas(初版,2008)
- relationship
- 本版为其修订第二版
- 年份
- 2008
- isbn
- 978-1-84800-323-1
- 标题
- Magnetic Control of Tokamak Plasmas(第2版,电子书,2016)
- relationship
- 同版电子载体
- isbn
- 978-3-319-29890-0
- 时间
- 2016-02-23
- 标题
- Magnetic Control of Tokamak Plasmas(第2版,平装,2018)
- relationship
- 同版平装发行,不据此认定为新版
- isbn
- 978-3-319-80679-2
- 时间
- 2018-04-07
书目标识
- ISBN:
- 978-3-319-29888-7
- 3319298887
- 国家图书馆号:
- LCCN 2016930821
- 图书馆分类号:
- DDC
- 621.48/4
- UDC
- 621.039.64
- local_shelfmark
- TK9204 .A74 2016
- 出版社编号:
- 暂无资料
- 外部数据库标识:
- OCLC
- 935185731
- Princeton
- 9995976133506421
相关作品与文献
- 相关书籍:
- 标题
- Finite-Time Stability and Control
- relationship
- 出版社作者简介列为Marco Ariola合著书
- 年份
- 2013
- 相关论文:
- 暂无资料
- 学术书评:
- 暂无资料
- 引用与被引用:
- count
- 74
- 平台
- Springer Nature Link
- observed_date
- 2026-11-03
- 相关项目与会议:
- Chapter 10: EUROfusion Consortium; Euratom research and training programme 2014–2018; grant agreement No 633053. Chapter 11: Italian MIUR; PRIN grant 2010SPS9B3.
- 同系列作品:
- series
- Advances in Industrial Control
- 前作:
- 暂无资料
- 续作:
- 暂无资料
- 影视/舞台/游戏改编:
- 暂无资料
- 推荐阅读与书单:
- 暂无资料
荣誉与影响
- 获奖记录:
- 暂无资料
- 入选榜单:
- 暂无资料
- 销量记录:
- 暂无资料
- 再版情况:
- 暂无资料
- 社会影响:
- 平台
- Springer Nature Link
- altmetric_score
- 1
- observed_date
- 2026-11-04
- 学术影响:
- 平台
- Springer Nature Link
- citations
- 74
- accesses_display
- 15k
- observed_date
- 2026-11-04
- 历史地位:
- 丛书编辑将本书评价为介绍新兴控制应用领域的有影响力专著,并指出该领域对发电行业可能具有长期重要性。
短评与书评
- 外部用户评论:
- 暂无资料
更多书籍资料
作品信息
- 副标题:
- 暂无资料
- 原作名:
- Magnetic Control of Tokamak Plasmas
- 别名:
- 暂无资料
- 简要介绍:
- type
- 站内整理
- 语言
- zh-CN
- edition
- 第2版(2016)
- 原文
- 本书讨论托卡马克等离子体的磁控制,分为等离子体建模和等离子体控制两部分,共11章及三个附录。内容覆盖磁控制模型、等离子体边界识别、阻性壁模、电流与位置控制、垂直稳定性和形状控制,并介绍FTU、TCV、JET及ITER相关控制方案。TCV与JET章节包含实验结果,ITER相关章节讨论设计方案;附录补充数学工具、模型降阶和测量单位。
- 原创语言:
- en
- 创作时间:
- 2015-10
- 首次出版时间:
- 2008
- 首次出版国家/地区:
- United Kingdom
- 原始出版社:
- Springer-Verlag London Limited
电子书与有声书
- 电子书格式:
- 数值
- EPUB
- isbn
- 978-3-319-29890-0
- 文件大小:
- 暂无资料
- 数字版权保护:
- 暂无资料
- 有声书时长:
- 暂无资料
- 朗读者:
- 暂无资料
- 音频平台:
- 暂无资料
- 无障碍与字幕:
- 出版社表示本书无障碍信息即将提供,暂未公布具体特性。
定价与获取
- 定价:
- EUR 129.99
- 币种:
- EUR
- 价格记录时间:
- 2026-11-04
- 销售状态:
- Buy Hardcover Book
- 库存状态:
- 暂无资料
- 图书馆馆藏:
- Princeton University Library;书目 9995976133506421: Princeton Plasma Physics Laboratory;Stacks;索书号 TK9204 .A75 2016 Lewis Library;Stacks;索书号 TK9204 .A75 2016 按 2026-11-03 访问的馆录保存,不表示实时可借状态。
- 二手市场:
- 暂无资料
- 出版成本:
- 暂无资料
- 印刷成本:
- 暂无资料
- 获奖奖金:
- 暂无资料
- 成本口径/估算说明:
- 暂无资料
图片与多媒体
- 作者照片:
- 暂无资料
- 目录图片:
- 暂无资料
- 授权扫描件:
- 暂无资料
- 试读文件:
- type
- 前置页PDF
- scope
- 第二版题名、版权、前言与目录
- 音频:
- 暂无资料
- 视频:
- 暂无资料
- 地图:
- 暂无资料
- 时间线:
- 暂无资料
- 3D 展示:
- 暂无资料
版权与许可
- 权利人:
- Springer International Publishing Switzerland
- 全文版权:
- © Springer International Publishing Switzerland 2008, 2016
- 图片版权:
- 2016版版权页明确保留插图再利用权(reuse of illustrations),全书或部分材料均受该版权声明约束。
- 试读授权:
- 官方前置页可供下载阅读;第二版版权声明仍保留全文及部分材料的再利用、复制和传播权利,未见独立开放许可。
- 音频授权:
- 暂无资料
- 许可证:
- All rights reserved(出版社保留权利;未见开放许可)
- 版权期限:
- 暂无资料
- 使用限制:
- This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed.
程序计算
- 质量分数:
- 暂无资料
- 完备性评分:
- 暂无资料
- 可信度评分:
- 暂无资料
- 聚变相关度评分:
- 暂无资料
评论 (0)