- 标题
- Preface
- 作者
- Shi Nguyen-Kuok
- pages
- v–viii
- 语言
- en
- 原文
- Preface
Presently, low-temperature plasma is widely used in science and engineering. Many
technological problems such as cutting and welding, melting of metals, welding and
spraying of refractory, wear-resistant, corrosion-resistant coatings, obtaining of
spherical and dispersion of powders, thermal surface treatment of refractory
materials, plasma polishing of optical glass and metals, recycling of heat-resistant
plasma chemical waste and others may be successfully solved using
low-temperature plasma. Different types of devices for obtaining of plasma flows
are developed—plasma torches, where the high-frequency induction (RF), the
high-frequency capacitance, ultrahigh-frequency (UHF) and optical discharges are
used as the plasma sources.
Effective use of these types of plasma torches requires extensive studies of
plasma processes in order to: identify their laws; receive the plasma stream with the
desired properties; determine the optimal operating conditions and the development
of new structures of plasma torches; direct control of the plasma; and others. These
problems can be solved on the basis of experimental studies and mathematical
modeling of processes in the plasma.
Field experiments (with the ability to implement them) give detailed information
about the plasma. Many phenomena in plasma have been predicted by theoretical
calculations, and discovered and confirmed experimentally, in particular, the results
of field experiments can be used for comparison with the experimental data in order
to analyze the physical processes and the direct control of the plasma.
Unfortunately, many experiments are expensive and experimental methods are
still far from perfect. The errors of the experimental methods are often large
enough, and often the experimental data of different authors have large discrep-
ancies and contradictory. Some experiments are difficult to carry out in conditions
of low-temperature plasma, and their data provide only its integral characteristics.
An important problem of determining the spatial distributions of quantities such
as temperature and composition of the plasma, gas flow rate, the electromagnetic
field inside the plasma flow and others, their relationships with the external
parameters of the plasma torch is a difficult experimental problem. The solution of
this problem becomes more difficult when you study the properties of multivariate,
v
<!-- page: 7 -->
vi Preface
nonequilibrium, transient, nonsymmetric plasma flows that is determined solely by
a wide variety of physical processes in the plasma and by the complex nature of its
components interaction.
Such difficulties in obtaining experimental data for a wide range of plasma flows
parameters make actual the development of theoretical modeling techniques.
Theoretical studies of the plasma by mathematical simulation methods allow to
eliminate many of the natural experiment limitations, complement and extend the
possibilities in the study of plasma, as well as replace complex, expensive, and
sometimes impracticable principal experiment. Based on the developed mathe-
matical models you can study the physical processes occurring in the plasma, set
optimal modes of plasma sources, to determine changes of the external adjustable
parameters, measuring point and the minimum number of measured physical
quantities needed for solving the problem of plasma control. In particular, progress
in the study of plasma and use cannot be without an in-depth theoretical studies.
One of the main tasks of theoretical studies of plasma processes is to obtain local
physical parameters of the plasma and the establishment of their links with external
power and the geometric parameters of the plasma torch. Typically, in engineering
design it is required to make some form of temperature distribution and plasma
flows, corresponding to the special conditions of practical use. This is typically
achieved by altering the current, plasma gas flow rate, the operating mode of the
generator, and the geometric characteristics of the plasma torch, i.e., only control
the external parameters of the plasma torch.
Significant progress in the use of the plasma can be achieved by providing direct
control of plasma flows. This requires a structural parametric identification of the
plasma. In this case, you first need to examine and define the properties and
parameters of the plasma, to find the place of measurement, to build functional
relationships, etc. This problem can be solved with the help of mathematical
modeling as a real object for study using different mathematical models describing
physical processes in the plasma. However, the theoretical description of the plasma
is often carried out with the help of highly nonlinear differential equations in partial
derivatives. The solution of these equations belongs to the class of rigid and
ill-conditioned problems, and is a serious mathematical and information problem.
The obtained results allow us to establish the flow pattern and gas heating, of
energy in the plasma, to determine the area of cold channel, thermal and ionic
imbalance in the plasma region preference models, create the necessary conditions
for solving the problem of structural parametric identification and on the basis
of the decision to make the transition to the system automatic control of plasma
parameters. You can also use the results as the necessary material for the study and
design of plasma torches, optimization of various plasma processes and the creation
of simulation models of plasma, which have been free from stability problems of
computational procedures.
To learn the basics of theory of low-temperature plasma readers are invited to
first familiarize themselves with the contents of the first five chapters. In Chap. 1 the
general approach to the description of plasma processes, the basic model of the
plasma, their assumptions and applicability are outlined. Models and cross sections
<!-- page: 8 -->
Preface vii
for the interaction of particles in the plasma are considered using the classical model
of elastic collisions in Chap. 2, and with the help of quantum-mechanical theory of
scattering particles in Chap. 3.
Determinations of the composition, thermodynamic functions, transport coeffi-
cients of the plasma on the basis of model and the mean free path are given in
Chap. 4. In Chap. 5 the solution of the Boltzmann kinetic equation by the
Chapman–Enskog approach and calculation of the transport coefficients of the
plasma are provided.
In Chap. 6 the main method of control volume for solving the problems of heat
transfer and plasma dynamics is presented along with the various numerical
schemes (methods) of solutions, their analysis in terms of accuracy, and the ease of
implementation. Stability analysis and determining the cause and the remedy of the
instability are also discussed in this chapter. We introduce the discrete analogues of
various equations of plasma mathematical models. The structural organization
of the computational procedures for the simulation of plasma processes is also
given.
In Chap. 7 the methodology and the main results of the simulation of the RF
plasma torches is set out. As an addition to those obtained in Chap. 6 algorithms,
there are the method of calculating the two-dimensional electromagnetic field in the
RF plasma torches and simulation of the RF plasma torches based equilibrium and
nonequilibrium models.
Similarly, in Chap. 8 the methodology and the main results of the simulation of
Arc plasma torches, different design and technological applications (Arc in the
channel for cutting and spraying, free Arc welding and melting of metals, etc.) are
presented.
In Chap. 9 the modern models and algorithms for the calculation of the
near-electrode processes taking into account the working conditions of the majority
of electric Arcs are described. The calculations for thermionic cathodes based on
pure and thoriated tungsten in a wide range of parameters of the cathode and
plasma, as well as algorithms for calculating the heating of the cathode and anode
processes are provided.
In Chap. 10 the issues of heat transfer and dynamics of solid particles in plasma,
model of heat and motion of particles in the plasma and the main results of the
calculations with respect to the jet of the RF plasma torches are described. The
results of the interaction model and the dispersed flow with the plasma are given.
Description of the experimental stand, the main methods of diagnosis, and the
results of measurements of plasma parameters in the induction and Arc plasma
torches are described in Chap. 11.
I would like to specially thank Profs. E. Son and S. Bobashev for carefully
reading the manuscript and for helpful comments during the preparation of this
book, as well as the staff of the Department of Electrical Engineering and Energy,
Saint-Petersburg State Polytechnic University and the General Physics and Nuclear
Fusion, National Research University «Moscow Power Engineering Institute» for
the help in the preparation of material of the book.
<!-- page: 9 -->
viii Preface
This book was written after my many years of working in the field of
low-temperature plasma physics. However, this would not have been possible if it
were not for many years of creative collaborations with Prof. S. Dresvin. He was
who introduced me to the world of low-temperature plasma physics, when I was
still a student of the Electromechanical Faculty of St. Petersburg State Polytechnic
University.
I would like to emphasize the special contribution to my creative extension
of the work of the Prof. O. Sokolov. During the many sleepless «White nights» in
St. Petersburg, we had a conversation with him about a systematic approach to
solve a multidimensional system of nonlinear differential equations. It is a great idea
that the internal feedback about physical processes found their realization in the
simulation model for a sustainable solution of a system of differential equations for
plasma.
I have many excellent professors, colleagues, friends, my talent graduate stu-
dents in colleges and universities of St. Petersburg and Moscow, and I would like to
emphasize their help and support in the process of working on the material of this
book.
I am infinitely grateful to my parent, my wife, and my sons for their help and
support. Their daily smiles are the driving motor of the writing of this book.
Hence, this book was written on behalf of all these wonderful people.
Moscow, Russia Shi Nguyen-Kuok
评论 (0)