MANTA
2024 年 MIT、哥伦比亚大学与通用原子能等协作组发表的负三角形度中试电站概念:轴上 11 T、聚变功率 450 MW、18 个非绝缘 REBCO 线圈(单匝 47.2 kA)。delta=-0.5 的用意是使 H 模/第二稳定区不可达,以 ELM-free L 模为设计点。
2024 年 MIT、哥伦比亚大学与通用原子能等协作组发表的负三角形度中试电站概念:轴上 11 T、聚变功率 450 MW、18 个非绝缘 REBCO 线圈(单匝 47.2 kA)。delta=-0.5 的用意是使 H 模/第二稳定区不可达,以 ELM-free L 模为设计点。
BOUT++ 是用于曲线坐标几何中流体与等离子体模拟的模块化计算框架,以 C++ 实现,采用有限差分方法,主要围绕约化等离子体流体模型设计与测试。使用者可选用已有模型,也可编写所需的物理方程;框架负责组织数值方法、时间推进、并行通信和输入输出。
轴对称环向位形:环向磁场与等离子体电流产生的极向磁场叠加形成螺旋磁力线,实现粒子约束。代表装置:EAST、ITER、JET、DIII-D。……
JOREK是非线性扩展磁流体代码,针对真实托卡马克X点几何模拟芯部、刮削层和偏滤器区域。它采用磁通面适配网格与全隐式数值方法,主要用于研究大尺度等离子体不稳定性、破裂及边缘局域模的物理过程和控制方法。
M3D-C1是求解扩展磁流体力学(MHD)方程的计算代码,将等离子体建模为由离子和电子组成的导电流体。PPPL说明其主要计算聚变等离子体的平衡、稳定性和动力学,面向托卡马克大尺度不稳定性及破裂,也用于部分天体物理研究。
If a velocity shear is large enough to overcome the magnetic tension force, small amplitude surface waves found in the velocity shear layer in a magnetohydrodynamic (MHD) plasma will be amplified by a velocity shear instability, which is also called Kelvin-Helmholtz (K-H) instability. The MHD K-H instability on a tangential discontinuity (TD) with a finite thickness is studied by means of a two-dimensional MHD simulation in the thesis. It is found that the nonlinear evolution of the K-H instability depends on the fast-mode Mach number of the surface wave obtained in the plasma rest frame. When the fast-mode Mach numbers on both sides of the TD are less than 1, the surface waves will be amplified by the K-H instability and grow into vortex structures or kink-type surface waves. When the fast-mode Mach number on either side of the surface wave is greater than 1, the surface disturbances associated with the K-H instability can generate fast-mode nonlinear plane waves on that side of the TD. A theoretical model of the magnetosonic cone, similar to the sonic cone generated by a supersonic aircraft, is proposed to explain the formation of the nonlinear plane waves in the high-Mach-number K-H instability. Applications of the simulation results to the magnetopause and to the solar wind are discussed in this thesis. Preliminary results of two controversial issues associated with the K-H instability are also addressed in this thesis. The first one is to examine whether the linear growth rate of the K-H instability should be uniform in a non-uniform medium as commonly presumed in previous studies. The analytical solutions of the non-uniform growth rates obtained in this thesis are in good agreement with the simulation results that the growth rate is non-uniform. The second one is a study of the energy transport on the K-H instability. Results of the energy transport indicate that most of the energy transfer process takes place near the velocity shear layer for the…
磁场重联提供了一种将磁能快速转化为等离子体动能和热能的有效机制,同时引起磁场拓扑结构的变化。磁场重联作为一个基本过程,被用来解释自然界中的能量的突然释放现象,例如在空间物理和磁约束聚变中。磁场重联常被各种不稳定性所激发。剪切流广泛存在空间等离子体和实验室等离子体中。剪切流对磁场重联的影响应该仔细地研究,尤其是有阿尔芬共振层的情况下,共振层出现在剪切流的速度与当地的 Alfven 速度相匹配的地方。 本文应用数值模拟的方法研究了超 Alfven 剪切流对磁场重联的影响。在不可压缩电阻磁流体力学模型下,我们发现一对 Alfven 共振层在重联层外形成。共振层位于初始流速度等于当地 Alfven 速度很窄的范围内。随着磁岛的发展,这对共振层慢慢远离重联分离线。共振层的出现强烈压制了磁场重联。抑制作用的强弱很大程度上依赖于共振层的强度和两个共振层间的距离。随着超Alfven 剪切流速度的增大或剪切宽度的减小,那对共振层有相互接近的趋势并且强度越来越大。当剪切流的速度在 $1 . 0 \sim 1 . 6 \nu _ { _ A }$ 之间变化时,最大重联率先增大后减小。这是Alfven 共振层的抑制作用与 Kelvin-Helmholtz 电阻不稳定性的促进作用相互竞争的结果。而对于不同宽度的剪切流,最大重联率也有类似抛物线的变化。当剪切流足够强或剪切宽度足够窄时,二级撕裂模发展起来,在重联过程中会有两个磁岛出现。这些结果可应用于理解实验室等离子体和空间等离子体中的磁场重联的动力学过程。 关键词: 剪切流;磁场重联;Alfven 共振层;不可压缩磁流体力学
Using a spatially-resolving x-ray spectrometer system, toroidal impurity rotation in Alcator C-Mod plasmas was measured. The propagation of the rotational velocity from the edge to the core of the plasma column was measured during the L- to H-mode transition. Momentum transport was measured in both Ohmic and ICRF-heated discharges, which produced EDA and ELM-free H-modes. The momentum transport was modeled by a simplified diffusion model, in which momentum diffusivity was substantially higher than neoclassically predicted values. Thesis Supervisor: Earl S. Marmar Title: Senior Research Scientist, Department of Physics Thesis Supervisor: John E. Rice Title: Principal Research Scientist, MIT Plasma Science and Fusion Center
In this thesis, we have investigated plasma instabilities with both sheared magnetic field and plasma flow within the framework of magnetohydrodynamics. The plasma flow is always chosen to be parallel to the magnetic field. In Cartesian coordinate,the plasma flow and magnetic field can be written $\mathfrak { a s } \colon \vec { u } = ( 0 , u _ { 0 } \operatorname { t a n h } ( x / d _ { v } ) , 0 ) , \vec { B } = ( 0 , B _ { 0 } \operatorname { t a n h } ( x / d ) , 0 )$ , respectively. The parameters $u _ { 0 } , d _ { v } , B _ { 0 } .$ , d are the flow speed, flow shear thickness, magnetic field strength, and current sheet thickness, respectively. In this configuration, both tearing instability and Kelvin-Helmholtz instability may develop under proper conditions. In the second chapter, we studied effects of sub-Alfvenic shear flows on plasma instabilities in an incompressible MHD model. With sub-Alfvenic shear flows, Kelvin-Helmholtz instability does not occur while tearing mode is unstable. It is found that the shear flow can either stabilize or destabilize the tearing mode, depending on both the speed and the shear thickness of the plasma flow. In the extreme case $\begin{array} { r } { R _ { 0 } = \frac { u _ { 0 } d } { B _ { 0 } d _ { v } } = 1 . 0 } \end{array}$ , the tearing mode is fully suppressed by the shear flow.…
High confinement (H-mode) discharges in tokamak experiments are characterized by a narrow region of steep pressure gradient called the “pedestal” that forms at the edge of the plasma, and often by an instability called an “Edge Localized Mode (ELM)” that periodically removes energy and particles from the edge of the plasma. The parameters at the top of the pedestal and the characteristics of ELMs have a strong influence on the performance of H-mode discharges. In this study, models for the pedestal are developed initially without including the effects of ELMs. The predictions from these pedestal models yield reasonable agreement with experimental data. These pedestal models are then used to provide boundary conditions in an integrated modeling code in order to simulate plasma profiles, such as temperature and density profiles, in existing H-mode experiments. The simulated profiles obtained using predictive boundary conditions and those obtained using experimental boundary conditions have similar agreement with experimental profiles. A more advanced pedestal model with a dynamic model for ELM crashes is developed using a concept of turbulence suppression at the edge of plasma. These pedestal and ELM models are coupled with a core transport model in an integrated modeling code. An advantage of this approach is that it allows for the evolution of plasma pressure and current profiles in the pedestal region, which can lead to an instability that triggers ELM crashes that limit the growth of the pedestal. Pressure-driven ballooning and current-driven peeling instabilities are considered as the possible instabilities that trigger ELM crashes. The combined core and pedestal models, with the effect of ELMs included, are used to study the dependence of triangularity and heating power on the pedestal. An MHD stability analysis is also performed to confirm the validity of these simulations. It is found that plasma edge stability improves as triangularity increases, as a…