第 31 版
Active feedback stabilization of pressure-driven modes in tokamaks is studied computationally in toroidal geometry. The stability problem is formulated in terms of open-loop transfer functions for fluxes in sensor coils resulting from currents in feedback coils. The transfer functions are computed by an extended version of the MARS stability code [A. Bondeson et al., Phys. Fluids B 4, 1889 (1992)] and can be accurately modeled by low order rational functions. In the present paper stability is analyzed for a system with an ideal amplifier (current control). It is shown that feedback with modest gain, and a single coil array poloidally, gives substantial stabilization for a range of coil shapes. Optimum design uses sensors for the poloidal field, located inside the resistive wall, in combination with rather wide feedback coils outside the wall. Typically, the feedback does not strongly modify the plasma-generated magnetic field perturbation. A future companion paper [C. M. Fransson et al., Phys. Plasmas (accepted for publication)] will apply control theory to study the limitations arising for finite time-constant of the amplifier-feedback coil circuit.
站内整理(2000年正式发表版,第I节):先进托卡马克追求高β和高自举电流份额;理想导电壁可提高稳定性极限,但有限电阻使壁涡流衰减,导致慢增长电阻壁模。反应堆预计旋转不足以可靠稳定这些模,因此研究主动反馈控制。
站内整理(第I节):比较极向与径向磁场传感器的反馈性能,研究简单线圈系统的最佳几何布置,并建立等离子体—电阻壁—反馈线圈的电路与传递函数模型,为实际放大器动态下的控制器设计提供基础。