返回词条

charge coupled device · 历史版本

版本编辑者时间修改说明
第 4 版站方导入2026/11/9 07:32:43百科字段核查:fields.content
第 3 版站方导入2026/10/16 02:57:04按统一模板整理并保留字段来源
第 2 版站方导入2026/10/16 02:57:04按统一模板整理并保留字段来源
第 1 版站方导入2026/10/12 09:24:18根据原始来源更新词条

第 4 版

部件简介

A charge-coupled device is a solid-state detector made from an array of closely spaced photosensitive elements. Photon interaction generates charge in each pixel; the stored packets are shifted through the array and measured electronically. CCDs can be linear or two-dimensional area arrays and are widely used for spectroscopy and imaging.

工作原理

During integration, incident light creates electron-hole pairs and charge accumulates in each pixel. Clocked electrode potentials transfer the charge packet from one element to the next toward an output register, where it is converted to a voltage and digitized. Pixel charge is proportional to collected signal over the integration interval, subject to saturation and noise.

聚变装置中的应用

CCDs provide multichannel detection in optical spectrometers, Raman systems, astronomy, microscopy, machine vision and scientific imaging. In spectroscopy, a whole wavelength interval can be measured in one acquisition when the detector is coupled to a dispersive optic.

工程限制

Sensitivity, spectral range, read noise, dark current, full-well capacity, pixel uniformity and readout speed limit performance. CCD readout is often slower than modern CMOS architectures, and cooling, clocking, blooming control and calibration may be required for weak-signal or quantitative measurements.

参考资料