第 33 版
The influence of finite wall thickness on the stability of the resistive wall mode (RWM) in a
tokamak is determined using a simple cylindrical plasma model in which the dissipation required
to stabilize the mode is provided by neoclassical parallel ion viscosity. For present-day tokamaks,
which possess relatively thin walls, finite wall thickness effects are found to have relatively little
influence on the RWM stability boundaries, which are almost the same as those calculated in the
thin-wall limit. On the other hand, for next-step devices, which are likely to possess much thicker
walls than present-day tokamaks, finite wall thickness effects are found to significantly impede the
ability of plasma rotation to stabilize the RWM all the way to the perfect-wall stability limit.
站内整理(2013出版版):先进托卡马克需要依靠近贴导电壁提高外部扭曲模的β极限,而电阻壁模稳定是实现这一收益的前提。适度环向旋转可通过惯性与耗散的共同作用稳定RWM。此前理论多采用电磁薄壁近似;下一代装置可能因工程需要使用厚壁,已有厚壁研究主要讨论增长率,因此仍需研究厚度对稳定边界的影响。
站内整理(2013出版版):利用含新经典平行离子黏性的圆柱等离子体模型,直接确定有限壁厚对RWM稳定边界的影响,判断厚壁促进或阻碍环向旋转稳定RWM的条件,以及对有效β极限的意义。
站内整理(2013出版版):采用大纵横比、低β、圆截面托卡马克圆柱模型,以新经典平行离子黏性提供耗散,忽略极向旋转并取均匀环向角速度。由等离子体本征模方程积分获得复响应参数;分别求解真空区与有限厚导电壁内的磁通扰动,在壁内外边界匹配得到含修正贝塞尔函数的RWM色散关系,并给出薄壁及厚壁极限。计算采用典型DIII-D的m=3、n=1模参数,壁响应参数以Valen数据拟合。通过调整中心安全因子与环向角速度,使色散关系增长率为纯虚数,追踪临界稳定边界;改变相对壁厚时保持总电阻相同。